§ 19-30. Street light standards.

(a)

Aluminum street light standards shall be fabricated of a spun aluminum pole approximately twenty (20) feet in length of seven (7) inch diameter at bottom and four (4) inch diameter at top. The pole shall be furnished with a pole cap, anchor base bottom and a six (6) foot continuous rise single bracket for one and one-quarter (1¼") inch slip fitter mount. No scroll brass or truss arm shall be used with the arm. Pole shall be designed for mounting on concrete base with anchor bolts. In locations where similar street light standards exist, the new standards shall match those existing as near as possible. The director of operations must approve deviations from any part of this specification.

(b)

Concrete street light standards shall be approximately twenty (20) feet, nine (9) inches above grade and pole shall have bottom diameter of eight (8) inches above base; top diameter of five and three-eights (5 3/8 ") inches at a point of attachment or bracket. Base of pole shall be of bolt-down type from mounting of concrete base and shall have a two and one-half (2½) inch by eight (8) inch wiring hand hole. Standards shall be furnished with single six (6) foot continuous rise galvanized tubular bracket for one and one-quarter (1¼) inch slip fitter mounting. In locations where similar street light standards exist, new standards shall match those existing as near as possible. The director of operations must approve deviations from any part of this specification.

(Ord. No. 02-61, § 15, 4-11-02)